With the not so recent but recent relase of AI a lot has been changed. It can get a lot of tasks done in quick amount of times, quicker than any human could. But is AI like ChatGPT actually good at chess?
Thats what I am here to talk about.
I used the board spaces like c5 or f8 to be able to tell it where I am moving and then asked it to sugest the best move to do. This game was played against The Mechanical Turk whos ELO is still unkown (but I do have some blog posts with guesses on its ELO)
Here is the entire conversation with ChatGPT:
Me: Can u help me win a chess game?
It: Of course! What aspect of the game are you looking for help with? Do you need advice on opening strategies, mid-game tactics, or endgame techniques? Or perhaps you have a specific position in mind that you'd like some guidance on? Let me know how I can assist you!
Me: i will say the moves and u say what move I should do
It: Sure, I can help with that. Just let me know the current position and the moves played so far, and I'll suggest the next move for you.
Me: It is the start of the game what move should I do
It: A good opening move for White is to move either the pawn in front of the king two spaces forward (e4) or the pawn in front of the queen two spaces forward (d4). These are common and strong opening moves that control the center of the board and allow your pieces to develop quickly. Which one would you like to play?
Me: I did d4 opponent does d5
It: In response to your opponent's move d5, you can continue developing your pieces and controlling the center by playing Nf3 (knight to f3). This move prepares to castle kingside and supports your pawn on d4. It's a solid move that maintains pressure in the center and allows for further development of your pieces.
Me: ok
It: Great! Are there any more moves you'd like advice on or any other aspects of the game you'd like to discuss?
Me: oppent does Nf6
It: After your opponent plays Nf6, you can continue your development by playing Nc3 (knight to c3). This move develops another piece and adds more control to the center of the board. It also prepares to castle kingside and supports your pawn on d4.
Me: opponent does bf5
It: Your opponent's move Bf5 (bishop to f5) attacks your pawn on d4. In response, you can play e3 to defend your d4 pawn with your pawn on e3. This move also helps in preparing to develop your bishop to a good square, such as Bb5 or Bd3, in the next few moves.
Me: opponent does e6
It: Your opponent's move e6 prepares to develop their bishop and potentially fianchetto it to g7. In response, you can continue your development and control of the center by playing Bd3 (bishop to d3). This move develops your bishop to an active square, adds support to your pawn on e4, and prepares to castle kingside.
Me: ok they do c6
It: Your opponent's move c6 aims to support their d5 pawn and possibly prepare for a future pawn push to d5. In response, you can continue your development and prepare for castling by playing Be2 (bishop to e2). This move develops your bishop to a good square, prepares for castling kingside, and maintains a solid position in the center.
Me: they do h6
It: Your opponent's move h6 creates luft for their king and prevents any potential back-rank mate threats. In response, you can continue your development and prepare to castle kingside by playing 0-0 (castling kingside). This move brings your king to safety and connects your rooks, allowing for potential future rook maneuvers along the back rank.
Me: what move do i do?
It: Since castling kingside is no longer an option due to your opponent's move h6, you can consider developing your pieces further. One option is to continue developing your pieces by playing Re1 (rook to e1). This move brings your rook to a central file, potentially supporting the e4 pawn and preparing for the opening of the e-file in the future
Me: i cant my bishop is there
It: I see, in that case, you can consider developing your remaining bishop or knight. A good move could be Bb5 (bishop to b5), pinning your opponent's knight to the king. This move puts pressure on your opponent's position and prepares to potentially trade bishops or gain a positional advantage.
Me: they do cxb5
It: Your opponent's move cxb5 captures your pawn on b5. In response, you can recapture with your bishop by playing Bxb5 (bishop takes b5). This maintains the pin on their knight and also opens up the a-file for your rook to potentially become active.
Me: no they took my bishop on b5 what move do i do
It: I see, your opponent has captured your bishop with cxb5. In this case, you can continue developing your pieces and reinforce your center by playing dxc5 (pawn takes c5). This move recaptures the pawn and maintains your control over the center of the board.
Me: i cant but i can do bishop on c3 to b5 should I?
It: Yes, you can certainly consider moving your bishop from c3 to b5. This move puts pressure on your opponent's position by attacking their knight on f6. It also pins the knight to their king, potentially creating tactical opportunities in the future. However, before making this move, consider if there are any immediate threats or tactics from your opponent that you need to address.
Me: ok they do a6 what do I do
It: Since your opponent played a6, creating luft for their king and potentially preparing to fianchetto their bishop to b7, you can consider further development and centralization. One option is to play Qe2, centralizing your queen and preparing to connect your rooks. This move also puts indirect pressure on the pawn on e6 and potentially prepares for a pawn push to e4 in the future.
Me: they did axb5
It: Your opponent's move axb5 captures your pawn on b5. In response, you can recapture the pawn with your a-pawn by playing axb5 (a takes b5). This maintains material equality and keeps the position balanced.
Me: no they took my rook on b5 what do i do now
It:
I see, your opponent has captured your rook on b5 with axb5. In this situation, you have a few options depending on the position and your strategic goals:
Recapture the pawn with the a-pawn: You can play axb5, recapturing the pawn and keeping the material balanced.
Develop another piece: If there are other pieces that need development, you can consider moves like Nc3 (knight to c3) or Qd3 (queen to d3) to continue improving your position.
Create threats or initiate an attack: Depending on the position, you might have tactical opportunities to create threats or initiate an attack. Look for potential tactics or weaknesses in your opponent's position.
Consider the overall position, your strategic plans, and any tactical opportunities before deciding on your move.
Me: I do Bd2 as that leads to a check on the king or taking the queen they do bd6
It: Your opponent's move Bd6 defends their pawn on e7 and develops their bishop to an active square. Since you mentioned that Bd2 could lead to a check on the king or taking the queen, you may want to continue with that plan if it's still viable. You can play Bd2 and see how your opponent responds. If they don't take immediate action to defend against the potential threats you mentioned, it could work out well for you.
Me: they dont have a pawn on e7 anyways what do I do
It: If there's no pawn on e7, then their bishop on d6 is indeed just developed, not defending any specific pawn. In this case, you can continue developing your pieces and reinforcing your center. One option could be to play Nc3, developing your knight to a central square and preparing to castle kingside. This move also adds more support to your d4 pawn.
Me: i cant move a knight to c3 as it is on f3 right now
It:
You're right, I apologize for the oversight. Since your knight is on f3, you have a couple of options:
Continue developing: You can develop your remaining knight to c3 or g5, depending on the position and your plans.
Strengthen your center: Consider moves like c4 or e4 to reinforce your central pawns and gain more control over the center of the board.
Prepare for castling: You can also play a move like h3 or f4 to prepare for castling kingside and create luft for your king.
Which option sounds most appealing to you?
Me: i dont have another knight
It: Got it, thanks for clarifying. In that case, you can consider a move like h3 to create luft for your king and potentially prepare for a future pawn push with g4 to gain space on the kingside. This move also prevents any potential pins or threats involving a bishop or knight landing on g4.
Me: i did c4 they did bxc4
It: Your opponent's move bxc4 captures your pawn on c4. In response, you can recapture with your d-pawn by playing dxc4 (d takes c4). This keeps the position balanced and maintains control over the center of the board.
Me: i do 0-0
It: Castling kingside (0-0) is a solid move that brings your king to safety and connects your rooks. It's a fundamental part of chess strategy, especially in the opening and early middle game. Now that you've castled, your king is safer and your rooks are connected, allowing for potential future rook maneuvers along the back rank. What's your next move or plan?
Me: they do bd3
It: Your opponent's move Bd3 puts pressure on your f7 pawn and creates potential threats against your king's position. Since your king is already castled, it's not an immediate threat, but you may want to be cautious and address this bishop's activity. One option could be to play h3 to chase the bishop away and create luft for your king, or you could consider developing your remaining pieces, such as your queen or rooks, to improve your position and prepare for the middle game.
Me: my queen is about to be taken what do i do
It:
If your queen is about to be captured, you should prioritize saving it or creating a counter-threat to gain an advantage. Here are a few options depending on the specific position:
Move the queen to safety: If possible, move your queen to a safe square where it can't be captured by the opponent's bishop. For example, you can move it to c2, d3, or e2.
Create a counter-threat: Look for opportunities to create a counter-threat against your opponent's pieces or pawns. This could be attacking their bishop, threatening their king, or creating a tactical sequence that forces them to defend and gives you an advantage.
Sacrifice the queen for compensation: In some situations, sacrificing the queen for positional or tactical compensation can be a viable strategy. Evaluate the position carefully to determine if sacrificing the queen would lead to a favorable outcome, such as gaining material or positional advantages.
Consider the position carefully and choose the option that best fits your overall strategy and tactical opportunities.
Me: i did qd1 they do bxf1
It:
After your opponent plays Bxf1, capturing your rook on f1, you have a few options to consider:
Recapture the bishop: You can recapture the bishop with your rook by playing Rxf1. This maintains material equality and keeps the game balanced.
Consider other captures or threats: Evaluate if there are any other captures or threats you can make that would improve your position or create tactical opportunities.
Continue development: If there are still pieces that need development, consider moves that help improve your overall position and piece activity.
Which option do you think suits your position and strategy best?
Me: i do kxf1
It:
After playing Kxf1 (king takes f1), your position should be relatively balanced in terms of material. Now, it's important to focus on improving your piece activity and positioning. Here are a few general guidelines to consider:
Complete your development: Ensure that all your pieces are developed and actively contributing to the game. Look for squares where your pieces can be more effective.
Centralize your king: With your king on f1, consider centralizing it further, either by moving it to e2 or d2, depending on the position and the potential threats your opponent may have.
Plan for the middle game: Start formulating a plan for the middle game based on the position of your pieces, pawn structure, and potential weaknesses in your opponent's position.
What are your thoughts on the next moves or any specific aspects of the position you'd like to discuss?
Me: my king is on f1
It:
Got it. Since your king is on f1, it's already centralized to some extent. In this case, you can focus on further improving your piece activity and coordinating your forces. Here are a few ideas:
Complete development: Make sure all your remaining pieces are developed to active squares. Consider moves like Nc3, Bd3, or Re1 to further develop your pieces and improve their coordination.
Connect your rooks: Bring your rooks into play by connecting them along the back rank. You can achieve this by playing Re1 or Rd1, depending on which rook you want to connect first.
Solidify your pawn structure: Evaluate your pawn structure and make sure it's solid. Look for any weaknesses or potential pawn breaks that you can exploit or defend against.
Considering these ideas, which move or plan are you leaning towards?
Me: i do be1 to protect my biship from a e4 knight
I am not going to write all of the chat as its long and boring . . .
But I did end up losing.
So for the answer, no chatGPT is not good at chess
