15 Types of Admixtures Used in Concrete (2024)

🕑 Reading time: 1 minute

Various types of admixtures are used in concrete to enhance the performance of concrete.Concrete admixture is defined as the material other than the aggregate, water and cement added to the concrete.

Types of Concrete Admixtures

Concrete admixtures are of different types and they are as follows:

  1. Water Reducing Admixtures
  2. Retarding Admixtures
  3. Accelerating Admixtures
  4. Air entraining concrete admixture
  5. Pozzolanic Admixtures
  6. Damp-proofing Admixtures
  7. Gas forming Admixtures
  8. Air detraining Admixtures
  9. Alkali Aggregate Expansion Inhibiting Admixtures
  10. Anti-washout Admixtures
  11. Grouting Admixtures
  12. Corrosion Inhibiting Admixtures
  13. Bonding Admixtures
  14. Fungicidal, Germicidal, Insecticidal Admixtures
  15. Coloring Admixtures

1. Water Reducing Admixtures

Water reducing admixtures, the name itself defining that they are used to minimize the water demand in a concrete mix. Workability is the important property of concrete which is improved with the addition of water but if water is added more than required the strength and durability properties of concrete gets affected.In addition to increase in workability it also improves the strength of concrete, good bond between concrete and steel, prevents cracking, segregation, honeycombing, bleeding etc.Water reducing admixtures are also called as plasticizers and these are classified into three types namely plasticizers, mid-range plasticizers and super plasticizers. Normal plasticizer reduces the water demand up to 10%, mid-range plasticizers reduce the water demand up to 15% while super plasticizers reduce the water demand up to 30%.Calcium, sodium and ammonium lignosulphonates are commonly used plasticizers. Some of the new generation super plasticizers are acrylic polymer based, poly carboxylate, multicarbovylatethers etc.

15 Types of Admixtures Used in Concrete (1)

Fig 1: Water Reducing Admixture

2. Retarding Admixtures

Retarding admixtures slow down the rate of hydration of cement in its initial stage and increase the initial setting time of concrete. These are also called as retarders and used especially in high temperature zones where concrete will set quickly.The quick setting in some situations may lead to discontinuities in structure, poor bond between the surfaces, creates unnecessary voids in concrete etc. Retarders are useful to eliminate this type of problems.Commonly used retarding admixture is calcium sulphate or gypsum. Starch, cellulose products, common sugar, salts of acids are some other retarders. Most of water reducing admixtures are also acts as retarding admixtures and they are called as retarding plasticizers.

15 Types of Admixtures Used in Concrete (2)

Fig 2: Retarding Admixture (Gypsum)

3. Accelerating Admixtures

Accelerating admixtures are used to reduce the initial setting time of concrete. They speed up the process of initial stage of hardening of concrete hence they are also called as accelerators. These accelerators also improves the strength of concrete in it early stage by increasing the rate of hydration.Earlier hardening of concrete is useful in several situations such as early removal of formwork, less period of curing, emergency repair works, for constructions in low temperature regions etc.Some of the accelerating admixtures are triethenolamine, calcium formate, silica fume, calcium chloride, finely divided silica gel etc. Calcium chloride is the cheap and commonly used accelerating admixture.

4. Air Entraining Concrete Admixture

Air entraining admixtures are one of the most important inventions in concrete technology. Their primary function is to increase the durability of concrete under freezing and thawing conditions. When added to concrete mix, these admixtures will form millions of non-coalescing air bubbles throughout the mix and improves the properties of concrete.Air entrainment in concrete will also improve the workability of concrete, prevents segregation and bleeding, lower the unit weight and modulus of elasticity of concrete, improves the chemical resistance of concrete and reduction of cement or sand or water content in concrete etc.Most used air entrainment admixtures are vinsol resin, darex, Teepol, Cheecol etc. These admixtures are actually made of Natural wood resins, alkali salts, animal and vegetable fats and oils etc.

15 Types of Admixtures Used in Concrete (4)

Fig 4: Freezing and Thawing Effect on Concrete

5. Pozzolanic Admixtures

Pozzolanic admixtures are used to prepare dense concrete mix which is bets suitable for water retaining structures like dams, reservoirs etc. They also reduce the heat of hydration and thermal shrinkage.Best pozzolanic materials in optimum quantity gives best results and prevents or reduces many risks such as alkali aggregate reaction, leaching, sulfate attack etc.Pozzolanic materials used as admixtures are either natural or artificial. Naturally occurring Pozzolanic materials are clay, shale, volcanic tuffs, pumicite, etc. and artificial pozzolans available are fly ash, silica fume, blast furnace slag, rice husk ash, surkhi etc.

15 Types of Admixtures Used in Concrete (5)

Fig 5: Fly ash

6. Damp-proofing Admixtures

Damp proofing or water proofing admixtures are used to make the concrete structure impermeable against water and to prevent dampness on concrete surface. In addition to water proof property, they also acts like accelerators in early stage of concrete hardening.Damp proofing admixtures are available in liquid form, powder form, paste form etc. The main constituents of these admixtures are aluminum sulfate, zinc sulfate aluminum chloride, calcium chloride, silicate of soda etc. which are chemically active pore fillers.

15 Types of Admixtures Used in Concrete (6)

Fig 6: Dampness on Concrete Surface

7. Gas forming Admixtures

Aluminum powder, activated carbon, hydrogen peroxide are generally used gas forming chemical admixtures. When gas forming admixtures are added, it reacts with hydroxide obtained by the hydration of cement and forms minute bubbles of hydrogen gas in the concrete.The range of formation of bubbles in concrete is depends upon many factors such as amount of admixture, chemical composition of cement, temperature, fineness etc. The formed bubbles helps the concrete to counteract the settlement and bleeding problems.

15 Types of Admixtures Used in Concrete (7)

Fig 7: Activated Carbon Powder

Gas forming admixtures are also used to prepare light weight concrete. For settlement and bleeding resistance purpose, small quantity of gas forming admixtures which is generally 0.5 to 2% by weight of cement is used. But for making light weight concrete larger quantity generally 100 grams per bag of cement is recommended.

8. Air detraining Admixtures

Air-detraining Admixtures are used to remove the excess air from the concrete voids. Sometimes, the aggregates may release the gas into concrete and air entrained is more than required then this type of admixtures are useful.Some of the mostly used air-detraining admixtures are tributyl phosphate, silicones, water insoluble alcohols etc.

9. Alkali Aggregate Expansion Preventing Admixtures

Alkali aggregate expansion in concrete is happened by the reaction of alkali of cement with the silica present in the aggregates. It forms a gel like substance and cause volumetric expansion of concrete which may lead to cracking and disintegration.Use of pozzolanic admixtures will prevent the alkali-aggregate reaction and in some cases air-entraining admixtures are also useful. Generally used admixtures to reduce the risk of alkali aggregate reaction are aluminum powder and lithium salts.

15 Types of Admixtures Used in Concrete (8)

Fig 8: Effect of Alkali Aggregate Reaction on Concrete

10. Anti-washout Admixtures

Anti-washout admixtures are used in concrete especially for under water concrete structure. It protect the concrete mix from being washed out under water pressure. It improves the cohesiveness of concrete.This type of admixtures are prepared from natural or synthetic rubbers, cellulose based thickeners etc.

15 Types of Admixtures Used in Concrete (9)

Fig 9: Underwater Concreting

11. Grouting Admixtures

Grouting admixtures are added to grout materials to improve the grout properties according to the requirement of grout. Sometimes, there is a need of quick set grout and sometimes there is a need of slow set grout to spread into deep cracks or fissures.Hence, different admixtures are used as grout admixtures based on situation. Accelerators like calcium chloride, triethanolamine etc. are used as grout admixtures when the grout is to be set rapidly. Similarly retarders like mucic acid, gypsum etc. are used to slow down the setting time of grout.Gas forming admixtures like aluminum powder is added to grout material to counteract the settle of foundations.

15 Types of Admixtures Used in Concrete (10)

Fig 10: Grouting

12. Corrosion Preventing Admixtures

Corrosion of steel in reinforced concrete structure is general and it is severe when the structure is exposed to saline water, industrial fumes, chlorides etc. To prevent or to slow down the process of corrosion preventing admixtures are used.Some of the corrosion preventing admixtures used in reinforced concrete are sodium benzoate, sodium nitrate, sodium nitrite etc.

15 Types of Admixtures Used in Concrete (11)

Fig 11: Corrosion of Steel in Concrete

13. Bonding Admixtures

Bonding admixtures are used to create a bond between old and fresh concrete surfaces. In general, if fresh concrete is poured over a hardened concrete surface, there is a chance of failure of fresh concrete surface due to weak bond with old surface.To make the bond stronger, bonding admixtures are added to cement or mortar grout which is applied on the concrete surface just before placing fresh concrete. This type of admixtures are used for pavement overlays, screed over roof provision, repair works etc.Bonding admixtures are water emulsions and they are made from natural rubber, synthetic rubbers, polymers like poly vinyl chloride, polyvinyl acetate etc.

15 Types of Admixtures Used in Concrete (12)

Fig 12: Concrete Pavement Overlay

14. Fungicidal, Germicidal, Insecticidal Admixtures

To prevent the growth of bacteria, germs, fungus on hardened concrete structures, it is recommended that the mix should have fungicidal, germicidal and insecticidal properties. This properties can be developed by adding admixtures like polyhalogenated phenols, copper compounds and dieledren emulsions etc.

15 Types of Admixtures Used in Concrete (13)

Fig 13: Concrete affected by Fungi

15. Coloring Admixtures

Coloring admixtures are the pigments which produce color in the finished concrete. The admixtures used to produce color should not affect the concrete strength. Generally coloring admixtures are added to cement in a ball mill, then colored cement can be obtained which can be used for making colored concrete. Some of the coloring admixtures and their resultant colors are tabulated below.

Table 1: Coloring Admixtures and their Resultant Colors

AdmixtureColor obtained
Iron or Red oxideRed
Hydroxides of ironYellow
Barium manganite and UltramarineBlue
Chromium oxide and chromium hydroxideGreen
Ferrous oxidePurple
Carbon blackBlack
Manganese black , Raw umberBrown

15 Types of Admixtures Used in Concrete (14)

Fig 14: Colored Concrete

15 Types of Admixtures Used in Concrete (2024)

References

Top Articles
Learn the Roblox Coding Language and Build Your First Game
How To Teach Yourself Scripting on Roblox
Skyblock Ah History
Family Day returns to Dobbins bigger than before
Best Boxing Gyms Near Me
Capital In The Caribbean Nyt
The McPherson Republican from McPherson, Kansas
Guardians Of The Galaxy Showtimes Near Athol Cinemas 8
Wjbd Weather Radar
Estate Sales Net Grand Rapids
Low-iron glass : making a clear difference
Yovanis Pizzeria - View Menu & Order Online - 741 NY-211 East, Middletown, NY 10941 - Slice
1888 Metro 8
Fintechzoommortgagecalculator.live Hours
Craigslist Pets Baton Rouge La
13.2 The F Distribution and the F Ratio - Statistics | OpenStax
Nissan Rogue Tire Size
Txu Cash Back Loyalty Card Balance
Kyle Gibson Stats Vs Blue Jays 5 Games | StatMuse
Kira Kener 2022
Benjamin Hilton co*ck
C.J. Stroud und Bryce Young: Zwei völlig unterschiedliche Geschichten
Melanin - Altmeyers Enzyklopädie - Fachbereich Dermatologie
Merrick Rv Loans
1773X To
Andrew Camarata Castle Google Maps
Bluestacks How To Change Master Instance
Lawson Uhs
Mugshots Gaston Gazette
Https://Gw.mybeacon.its.state.nc.us/App
Holley Gamble Funeral Home In Clinton
Ralph Macchio Conservative
Harry Potter 3 123Movies
Utexas Baseball Schedule 2023
Sunset Time Yesterday
Lohud Rockland Obituaries
Decree Of Spite Poe
Middletown Pa Craigslist
Smokingmeatforum
600 Aviator Court Vandalia Oh 45377
R/Moissanite
Ihop Ralph Ave
NDS | Kosttilskud, Probiotika & Collagen | Se udvalget her
Arre St Wv Srj
La Monja 2 Pelicula Completa Tokyvideo
Do Diversity Visa Lottery Winners Need Affidavit Of Support With Green Card Application Is Affidavit
Busty Young Cheerleaders
Why Did Jen Lewis Leave Wavy 10
Fishing Report - Southwest Zone
Wat is een Microsoft Tenant
The most memorable songs from '90s movies
Munich Bavaria Germany 15 Day Weather Forecast
Latest Posts
Article information

Author: Aron Pacocha

Last Updated:

Views: 6157

Rating: 4.8 / 5 (48 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Aron Pacocha

Birthday: 1999-08-12

Address: 3808 Moen Corner, Gorczanyport, FL 67364-2074

Phone: +393457723392

Job: Retail Consultant

Hobby: Jewelry making, Cooking, Gaming, Reading, Juggling, Cabaret, Origami

Introduction: My name is Aron Pacocha, I am a happy, tasty, innocent, proud, talented, courageous, magnificent person who loves writing and wants to share my knowledge and understanding with you.